DESCRIERE
Grab bar with right support white steel
Ref. GW11 11 03 00No built- in angle bar with three points of support located on the endings.
The bar consists of a carbon steel tube with 32 mm of diameter and 1.5 mm of thickness.
The tube is bended on ÒUÓ shape for main part
and ÒLÓ shape on the right.
The three mounting flanges are made of zinc-plated carbon steel plate with anticorrosion treatment of 2.5 mm of thickness and 77,5 mm of diameter. Mounting flanges have three holes for wall attachment and snap flange covers with 0.5 mm of thickness.
The white epoxy steel assembled unit has suitable resistance to corrosion.
The bar is fixed to the wall by means of 9 nylon wall plugs (8X50)
and steel screws (5X60).
Grab bar will support loads in excess of 120Kg if properly installed.