DESCRIPTION
Folding bar 750mm floor support white steel
Ref. GW11 09 03 00Vertical folding bar with gradual breaking system incorporated.
This horizontal installation bar is composed of a carbon steel tubing with 32 mm of diameter and 1.5 mm of thickness.
The tube has been bent as a ÒUÓ and it is reinforced by a joist with a paper hanger located in the middle.
The floor support is composed of a carbon steel plate.
The two carbon steel hinges with 3 mm of thickness using to turn the folding bar are located on the anchoring column of 50 x 50, made of carbon steel of 1.5 mm of thickness. All the pieces have been welded by TIG method.
There are 4 bores on the floor mounted to support the bar on the
wall.
All the pieces of the bar have a white epoxy finish.
The folding bar complies the ADA regulation.
The bar is fixed to the floor with 4 nylon plugs of 10X60 and carbon steel screws of 8X70 with hexagonal head.
Grab bar will support loads in excess of 120Kg if properly installed.
The total measures of the product are 750x850x240 mm